Mechanical Activation Of Valvular Interstitial Cell Phenotype

During heart valve remodeling, and in many disease states, valvular interstitial cells (VICs) shift to an activated myofibroblast phenotype which is characterized by enhanced synthetic and contractile activity. Pronounced alpha smooth muscle actin (alpha-SMA)-containing stress fibers, the hallmark of activated myofibroblasts, are also observed when VICs are placed under tension due to altered mechanical loading in vivo or during in vitro culture on stiff substrates or under high mechanical loads and in the presence of transforming growth factor-beta 1 (TGF-beta 1). The work presented herein describes three distinct model systems for application of controlled mechanical environment to VICs cultured in vitro. The first system uses polyacrylamide (PA) gels of defined stiffness to evaluate the response of VICs over a large range of stiffness levels and TGF-beta 1 concentration. The second system controls the boundary stiffness of cell-populated gels using springs of defined stiffness. The third system cyclically stretches soft or stiff two-dimensional (2D) gels while cells are cultured on the gel surface as it is deformed. Through the use of these model systems, we have found that the level of 2D stiffness required to maintain the quiescent VIC phenotype is potentially too low for a material to both act as matrix to support cell growth in the non-activated state and also to withstand the mechanical loading that occurs during the cardiac cycle. Further, we found that increasing the boundary stiffness on a three-dimensional (3D) cell populated collagen gel resulted in increased cellular contractile forces, alpha-SMA expression, and collagen gel (material)stiffness. Finally, VIC morphology is significantly altered in response to stiffness and stretch. On soft 2D substrates, VICs cultured statically exhibit a small rounded morphology, significantly smaller than on stiff substrates. Following equibiaxial cyclic stretch, VICs spread to the extent of cells cultured on stiff substrates, but did not reorient in response to uniaxial stretch to the extent of cells stretched on stiff substrates. These studies provide critical information for characterizing how VICs respond to mechanical stimuli. Characterization of these responses is important for the development of tissue engineered heart valves and contributes to the understanding of the role of mechanical cues on valve pathology and disease onset and progression. While this work is focused on valvular interstitial cells, the culture conditions and methods for applying mechanical stimulation could be applied to numerous other adherent cell types providing information on the response to mechanical stimuli relevant for optimizing cell culture, engineered tissues or fundamental research of disease states

Mechanical Activation of Valvular Interstitial Cell Phenotype: A Dissertation

During heart valve remodeling, and in many disease states, valvular interstitial cells (VICs) shift to an activated myofibroblast phenotype which is characterized by enhanced synthetic and contractile activity. Pronounced alpha smooth muscle actin (αSMA)-containing stress fibers, the hallmark of activated myofibroblasts, are also observed when VICs are placed under tension due to altered mechanical loading in vivo or during in vitro culture on stiff substrates or under high mechanical loads and in the presence of transforming growth factor-beta1 (TGF-β1). The work presented herein describes three distinct model systems for application of controlled mechanical environment to VICs cultured in vitro. The first system uses polyacrylamide (PA) gels of defined stiffness to evaluate the response of VICs over a large range of stiffness levels and TGF-β1 concentration. The second system controls the boundary stiffness of cell-populated gels using springs of defined stiffness. The third system cyclically stretches soft or stiff two-dimensional (2D) gels while cells are cultured on the gel surface as it is deformed. Through the use of these model systems, we have found that the level of 2D stiffness required to maintain the quiescent VIC phenotype is potentially too low for a material to both act as matrix to support cell growth in the non-activated state and also to withstand the mechanical loading that occurs during the cardiac cycle. Further, we found that increasing the boundary stiffness on a three-dimensional (3D) cell populated collagen gel resulted in increased cellular contractile forces, αSMA expression, and collagen gel (material) stiffness. Finally, VIC morphology is significantly altered in response to stiffness and stretch. On soft 2D substrates, VICs cultured statically exhibit a small rounded morphology, significantly smaller than on stiff substrates. Following equibiaxial cyclic stretch, VICs spread to the extent of cells cultured on stiff substrates, but did not reorient in response to uniaxial stretch to the extent of cells stretched on stiff substrates. These studies provide critical information for characterizing how VICs respond to mechanical stimuli. Characterization of these responses is important for the development of tissue engineered heart valves and contributes to the understanding of the role of mechanical cues on valve pathology and disease onset and progression. While this work is focused on valvular interstitial cells, the culture conditions and methods for applying mechanical stimulation could be applied to numerous other adherent cell types providing information on the response to mechanical stimuli relevant for optimizing cell culture, engineered tissues or fundamental research of disease states

MSE lower bounds for deterministic parameter estimation

This paper presents a simple approach for deriving computable lower bounds on the MSE of deterministic parameter estimators with a clear interpretation of the bounds. We also address the issue of lower bounds tightness in comparison with the MSE of ML estimators and their ability to predict the SNR threshold region. Last, as many practical estimation problems must be regarded as joint detection-estimation problems, we remind that the estimation performance must be conditional on detection performance

Community research report

University College Cork introduced its first Community-based Participatory Research (CBPR) module in 2016. The module was funded and supported by Horizon2020 funding, specifically the EnRRICH project (Enhancing Responsible Research and Innovation through Curricula in Higher Education). The module is a 5-credit module for PhD students from all disciplines in the early stages of their PhD at University College Cork. Following two fruitful partnerships in the areas of social justice / equality, community family support services and older persons, there was a keen interested to explore partnerships in markedly different areas such as environmental sustainability. A dialogue ensued with CEF where the opportunity and feasibility to collaborate on the CBPR module was explored

Crop Updates 2005 - Farming Systems

This session covers forty four papers from different authors: PLENARY 1. 2005 Outlook, David Stephens and Nicola Telcik, Department of Agriculture FERTILITY AND NUTRITION 2. The effect of higher nitrogen fertiliser prices on rotation and fertiliser strategies in cropping systems, Ross Kingwell, Department of Agriculture and University of Western Australia 3. Stubble management: The short and long term implications for crop nutrition and soil fertility, Wayne Pluske, Nutrient Management Systems and Bill Bowden, Department of Agriculture 4. Stubble management: The pros and cons of different methods, Bill Bowden, Department of Agriculture, Western Australia and Mike Collins, WANTFA 5. Effect of stubble burning and seasonality on microbial processes and nutrient recycling, Frances Hoyle, The University of Western Australia 6. Soil biology and crop production in Western Australian farming systems, D.V. Murphy, N. Milton, M. Osman, F.C. Hoyle, L.K Abbott, W.R. Cookson and S. Darmawanto, The University of Western Australia 7. Urea is as effective as CAN when no rain for 10 days, Bill Crabtree, Crabtree Agricultural Consulting 8. Fertiliser (N,P,S,K) and lime requirements for wheat production in the Merredin district, Geoff Anderson, Department of Agriculture and Darren Kidson, Summit Fertilizers 9. Trace element applications: Up-front verses foliar? Bill Bowden and Ross Brennan, Department of Agriculture 10. Fertcare®, Environmental Product Stewardship and Advisor Standards for thee Fertiliser Industry, Nick Drew, Fertilizer Industry Federation of Australia (FIFA) SOIL AND LAND MANAGEMENT 11. Species response to row spacing, density and nutrition, Bill Bowden, Craig Scanlan, Lisa Sherriff, Bob French and Reg Lunt, Department of Agriculture 12. Investigation into the influence of row orientation in lupin crops, Jeff Russell, Department of Agriculture and Angie Roe, Farm Focus Consultants 13. Deriving variable rate management zones for crops, Ian Maling, Silverfox Solutions and Matthew Adams, DLI 14. In a world of Precision Agriculture, weigh trailers are not passé, Jeff Russell, Department of Agriculture 15. Cover crop management to combat ryegrass resistance and improve yields, Jeff Russell, Department of Agriculture and Angie Roe, Farm Focus Consultants 16. ARGT home page, the place to find information on annual ryegrass toxicity on the web, Dr George Yan, BART Pty Ltd 17. Shallow leading tine (SLT) ripper significantly reduces draft force, improves soil tilth and allows even distribution of subsoil ameliorants, Mohammad Hamza, Glen Riethmuller and Wal Anderson, Department of Agriculture PASTURE ANS SUMMER CROP SYSTEMS 18. New annual pasture legumes for Mediteranean farming systems, Angelo Loi, Phil Nichols, Clinton Revell and David Ferris, Department of Agriculture 19. How sustainable are phase rotations with Lucerne? Phil Ward, CSIRO Plant Industry 20. Management practicalities of summer cropping, Andrea Hills and Sally-Anne Penny, Department of Agriculture 21. Rainfall zone determines the effect of summer crops on winter yields, Andrea Hills, Sally-Anne Penny and David Hall, Department of Agriculture 22. Summer crops and water use, Andrea Hills, Sally-Anne Penny and David Hall, Department of Agriculture, and Michael Robertson and Don Gaydon, CSIRO Brisbane 23. Risk analysis of sorgum cropping, Andrea Hills and Sally-Anne Penny, Department of Agriculture, and Dr Michael Robertson and Don Gaydon, CSIRO Brisbane FARMER DECISION SUPPORT AND ADOPTION 24. Variety release and End Point Royalties – a new system? Tress Walmsley, Department of Agriculture 25. Farming system analaysis using the STEP Tool, Caroline Peek and Megan Abrahams, Department of Agriculture 26. The Leakage Calculator: A simple tool for groundwater recharge assessment, Paul Raper, Department of Agriculture 27. The cost of Salinity Calculator – your tool to assessing the profitability of salinity management options, Richard O’Donnell and Trevor Lacey, Department of Agriculture 28. Climate decision support tools, Meredith Fairbanks and David Tennant, Department of Agriculture 29. Horses for courses – using the best tools to manage climate risk, Cameron Weeks, Mingenew-Irwin Group/Planfarm and Richard Quinlan, Planfarm Agronomy 30. Use of seasonal outlook for making N decisions in Merredin, Meredith Fairbanks and Alexandra Edward, Department of Agriculture 31. Forecasts and profits, Benefits or bulldust? Chris Carter and Doug Hamilton, Department of Agriculture 32. A tool to estimate fixed and variable header and tractor depreciation costs, Peter Tozer, Department of Agriculture 33. Partners in grain: ‘Putting new faces in new places’, Renaye Horne, Department of Agriculture 34. Results from the Grower group Alliance, Tracey Gianatti, Grower Group Alliance 35. Local Farmer Group Network – farming systems research opportunities through local groups, Paul Carmody, Local Farmer Group Network GREENHOUSE GAS AND CLIMATE CHANGE 36. Changing rainfall patterns in the grainbelt, Ian Foster, Department of Agriculture 37. Vulnerability of broadscale agriculture to the impacts of climate change, Michele John, CSIRO (formerly Department of Agriculture) and Ross George, Department of Agriculture 38. Impacts of climate change on wheat yield at Merredin, Imma Farré and Ian Foster, Department of Agriculture 39. Climate change, land use suitability and water security, Ian Kininmonth, Dennis van Gool and Neil Coles, Department of Agriculture 40. Nitrous oxide emissions from cropping systems, Bill Porter, Department of Agriculture, Louise Barton, University of Western Australia 41. The potential of greenhouse sinks to underwrite improved land management in Western Australia, Richard Harper and Peter Ritson, CRC for Greenhouse Accounting and Forest Products Commission, Tony Beck, Tony Beck Consulting Services, Chris Mitchell and Michael Hill, CRC for Greenhouse Accounting 42. Removing uncertainty from greenhouse emissions, Fiona Barker-Reid, Will Gates, Ken Wilson and Rob Baigent, Department of Primary Industries - Victoria and CRC for Greenhouse Accounting (CRCGA), and Ian Galbally, Mick Meyer and Ian Weeks, CSIRO Atmospheric Research and CRCGA 43. Greenhouse in Agriculture Program (GIA), Traci Griffin, CRC for Greenhouse Accounting 44. Grains Greenhouse Accounting framework, D. Rodriguez, M. Probust, M. Meyers, D. Chen, A. Bennett, W. Strong, R. Nussey, I. Galbally and M. Howden CONTACT DETAILS FOR PRINCIPAL AUTHOR

Genome sequencing and comparative genomics of the broad host-range pathogen Rhizoctonia solani AG8

Rhizoctonia solani is a soil-borne basidiomycete fungus with a necrotrophic lifestyle which is classified into fourteen reproductively incompatible anastomosis groups (AGs). One of these, AG8, is a devastating pathogen causing bare patch of cereals, brassicas and legumes. R. solani is a multinucleate heterokaryon containing significant heterozygosity within a single cell. This complexity posed significant challenges for the assembly of its genome. We present a high quality genome assembly of R. solani AG8 and a manually curated set of 13,964 genes supported by RNA-seq. The AG8 genome assembly used novel methods to produce a haploid representation of its heterokaryotic state. The whole-genomes of AG8, the rice pathogen AG1-IA and the potato pathogen AG3 were observed to be syntenic and co-linear. Genes and functions putatively relevant to pathogenicity were highlighted by comparing AG8 to known pathogenicity genes, orthology databases spanning 197 phytopathogenic taxa and AG1-IA.We also observed SNP-level “hypermutation” of CpG dinucleotides to TpG between AG8 nuclei, with similarities to repeat-induced point mutation (RIP). Interestingly, gene-coding regions were widely affected along with repetitive DNA, which has not been previously observed for RIP in mononuclear fungi of the Pezizomycotina. The rate of heterozygous SNP mutations within this single isolate of AG8 was observed to be higher than SNP mutation rates observed across populations of most fungal species compared. Comparative analyses were combined to predict biological processes relevant to AG8 and 308 proteins with effector-like characteristics, forming a valuable resource for further study of this pathosystem. Predicted effector-like proteins had elevated levels of non-synonymous point mutations relative to synonymous mutations (dN/dS), suggesting that they may be under diversifying selection pressures. In addition, the distant relationship to sequenced necrotrophs of the Ascomycota suggests the R. solani genome sequence may prove to be a useful resource in future comparative analysis of plant pathogens

BHPR research: qualitative1. Complex reasoning determines patients' perception of outcome following foot surgery in rheumatoid arhtritis

Background: Foot surgery is common in patients with RA but research into surgical outcomes is limited and conceptually flawed as current outcome measures lack face validity: to date no one has asked patients what is important to them. This study aimed to determine which factors are important to patients when evaluating the success of foot surgery in RA Methods: Semi structured interviews of RA patients who had undergone foot surgery were conducted and transcribed verbatim. Thematic analysis of interviews was conducted to explore issues that were important to patients. Results: 11 RA patients (9 ♂, mean age 59, dis dur = 22yrs, mean of 3 yrs post op) with mixed experiences of foot surgery were interviewed. Patients interpreted outcome in respect to a multitude of factors, frequently positive change in one aspect contrasted with negative opinions about another. Overall, four major themes emerged. Function: Functional ability & participation in valued activities were very important to patients. Walking ability was a key concern but patients interpreted levels of activity in light of other aspects of their disease, reflecting on change in functional ability more than overall level. Positive feelings of improved mobility were often moderated by negative self perception ("I mean, I still walk like a waddling duck”). Appearance: Appearance was important to almost all patients but perhaps the most complex theme of all. Physical appearance, foot shape, and footwear were closely interlinked, yet patients saw these as distinct separate concepts. Patients need to legitimize these feelings was clear and they frequently entered into a defensive repertoire ("it's not cosmetic surgery; it's something that's more important than that, you know?”). Clinician opinion: Surgeons' post operative evaluation of the procedure was very influential. The impact of this appraisal continued to affect patients' lasting impression irrespective of how the outcome compared to their initial goals ("when he'd done it ... he said that hasn't worked as good as he'd wanted to ... but the pain has gone”). Pain: Whilst pain was important to almost all patients, it appeared to be less important than the other themes. Pain was predominately raised when it influenced other themes, such as function; many still felt the need to legitimize their foot pain in order for health professionals to take it seriously ("in the end I went to my GP because it had happened a few times and I went to an orthopaedic surgeon who was quite dismissive of it, it was like what are you complaining about”). Conclusions: Patients interpret the outcome of foot surgery using a multitude of interrelated factors, particularly functional ability, appearance and surgeons' appraisal of the procedure. While pain was often noted, this appeared less important than other factors in the overall outcome of the surgery. Future research into foot surgery should incorporate the complexity of how patients determine their outcome Disclosure statement: All authors have declared no conflicts of interes